04
2023
-
01
Precautions for sheet machine
matters needing attention (1) No debris is allowed inside the material, and foreign objects such as metal, sand, and gravel are strictly prohibited from entering the hopper. (2) The screw is only allowed to start at low speed, with an idle time of no more than 1 minute. After timely feeding, the screw speed can be gradually increased. The screw speed and current cannot exceed the parameters (3) When opening the cooling water, slowly open the valve to see if the temperature is within a controllable range, and do not suddenly open it completely. (4) When inspecting the appearance of the coating, operators must wear high-temperature gloves for operation to prevent high-temperature burns.
Author:
matters needing attention
(1) No debris is allowed inside the material, and foreign objects such as metal, sand, and gravel are strictly prohibited from entering the hopper.
(2) The screw is only allowed to start at low speed, with an idle time of no more than 1 minute. After timely feeding, the screw speed can be gradually increased. The screw speed and current cannot exceed the parameters
(3) When opening the cooling water, slowly open the valve to see if the temperature is within a controllable range, and do not suddenly open it completely.
(4) When inspecting the appearance of the coating, operators must wear high-temperature gloves for operation to prevent high-temperature burns.
News
2023-01-04
2023-01-04
2023-01-04
2023-01-04
Shantou Xinhua Packing Machinery Co., Ltd.
Tel:86-754-82525115
Add:5th Jinye Road,No.2 Industry Area of Shengping.Daxue Road,Shantou ,Guangdong
Fax:86-754-88680313
E-mail: xinhua@stxinhua.com
Mobile website
Copyright © 2023 Shantou Xinhua Packing Machinery Co., Ltd.