25
2019
-
03
Key points in the installation and use of plastic cup making machines
During the installation and use of the plastic cup making machine, in order to ensure that the driver operates at normal temperature, attention should be paid to connecting the wires to ensure that the correct
Author:
During the installation and use of the plastic cup making machine, in order to ensure that the driver operates at normal temperature, attention should be paid to connecting the wires to ensure that the correct signal can be connected to ensure the normal operation of the servo; Due to the varying usage of different machines, in order to ensure the normal operation of the servo, it is necessary to set the servo control mode correctly. Match the data correctly based on the actual operation results, and do not set the operating ratio data of electronic positioning and gears when the servo and motor are running. To prevent intervention and electric shock, it is necessary to ensure that the motor drive interface is grounded and correctly connected to the drive and casing. The data signal cable should be connected to the interface end of the shell using shielded wires as much as possible. To prevent signal interference, interference from encoding signal sources, and control signals, it is necessary to maintain sufficient distance as much as possible.
The above are the key points to pay attention to during the installation and use of plastic preparation.
News
2023-01-04
2023-01-04
2023-01-04
2023-01-04
Shantou Xinhua Packing Machinery Co., Ltd.
Tel:86-754-82525115
Add:5th Jinye Road,No.2 Industry Area of Shengping.Daxue Road,Shantou ,Guangdong
Fax:86-754-88680313
E-mail: xinhua@stxinhua.com
Mobile website
Copyright © 2023 Shantou Xinhua Packing Machinery Co., Ltd.